MSRP price as configured. $0.00
Or skip the cart and
  • CPU

    2x up to 22 core Intel Xeon SP (Skylake)

  • MEMORY

    24x DDR4 2666MHz DIMM sockets (Max: 1.5 TB)

  • STORAGE

    8x 3.5"SATA,SSD drive bays (Max: 80 TB)

  • CONNECTIVITY

    Onboard 2x 10Gb NICs & Optional: 10GbE, 40GbE, InfiniBand, OmniPath, 100GbE

  • DENSITY

    Compute Block rackmount chassis with redundant power

Discounts are available for volume, education and government customers. Request a quote for product and pricing details.

Technical Specifications

In the box
  • ACTserv x2120 system
  • Documentation
Processor
  • 2x Intel Xeon SP series processors
  • Intel "Skylake" microarchitecture
Chipset
  • Intel C624 series
Memory
  • 2666MHz DDR4 memory
  • 24x DIMM sockets for support up to 1.5TB
Storage
  • 8x 3.5" hot-swap SATA drive bay and 2x rear hot-swap 2.5" SATA drive bays
  • Support RAID level 0,1,10,5,6 with Linux software RAID or optional hardware RAID controller
  • Support for high-performance solid state drives (SSD)
Management
  • Integrated IPMI 2.0 module
  • Integrated management controller providing iKVM and remote disk emulation
I/O Connections
  • 2x open PCI-e 3.0 expansion slots running at 16x; 3x open PCI-e 3.0 expansion slots running at 8x; and 1x open PCI-e 2.0 expansion slot running at 4x
  • 2x independent 10GbE BaseT Ethernet interfaces
  • 5x USB 3.0 ports
Electrical requirements
  • High-efficiency power supply (greater than 90%)
  • Output power: single 1300W; optional redundant 1300W
  • Universal input voltage 100V to 240V
  • Frequency: 50Hz to 60Hz, single phase
Size & Weight
  • Height: 3.5 inches (2U)
  • Width: 19 inches
  • Depth: 26 inches
  • Weight: Base config 50lbs, varies based on configuration
Operating System
  • RedHat Linux 6 and newer (most other distributions supported, call for details)

Request a Consultation from our team of HPC Experts

Would you like to speak to one of our HPC experts? We are here to help you. Submit your details, and we'll be in touch shortly.

  • This field is for validation purposes and should be left unchanged.