Custom configurations
Many custom configurations are available, including drive configurations, expansion cards, etc.
If you don't see the configuration you're looking for, use your Custom System form so we can configure your perfect machine.
Contact Us
Want to talk to someone about our systems? We are always just a phone call or email away.
|
|
Pinnacle 1FX2601 - Single Slot Pinancle Flex Compute Node with the Intel© Xeon© E5 Series Processor
Flex enclosure with four 1FX2601 flex nodes installed
Starting at $1,675.00 each
|
Configure Your System
Use the form below to configure each single slot Pinnacle Flex node. You can configure your Flex enclosure by using four of these single slot blades, or mix and match these single slot blades with one dual slot 2FX2601 model. Each Flex blade can contain a completely separate configuration - if you need assistance with the configuration, please give us a call at 866-802-8222 to discuss your needs.
To configure a dual slot Flex node click here for the 2FX2601 model.
Technical Specifications
- In the box
- Flex server housing
- 1-4 complete Flex nodes
- Rackmounting hardware
- 110V power cord(s)
- Documentation
- Processor (per module)
- Two Intel Xeon E5 Series processors
- Next generation "SandyBridge" microarchitecture
- Integrated memory controller and 2x QPI chipset interconnects per processor
- 32nm process technology
- Chipset (per module)
- Memory (per module)
- 1333MHz or 1600MHz DDR3 memory
- Sixteen DIMM sockets for support up to 256GB of memory
- Storage (per module)
- One 3.5" SATA2 drive bay or two hot-swap 2.5" SATA2 drive bays
- Support RAID level 0-1 with Linux software RAID (with 2.5" drives)
- Drives shock mounted into enclosure to prevent vibration related failures
- Support for high-performance solid state drives
- Management (per module)
- Integrated IPMI 2.0 module
- Integrated management controller providing iKVM and remote disk emulation.
|
- I/O connections (per module)
- One open PCI-Express 3.0 expansion slot running at 16x
- Two independent 10/100/1000Base-T (Gigabit) RJ-45 Etherent interfaces
- Two USB 2.0 ports
- One DB-9 serial port (RS-232)
- One VGA port
- Optional ConnectX-3 QDR (40Gb/s) or FDR (56Gb/s) InfiniBand QSFP connector
- Electrical Requirements (per module)
- High-efficiency power supply (greater than 80%)
- Output Power: 500W
- Universal input voltage 100V to 240V
- Frequency: 50Hz to 60Hz, single phase
- Size and weight (blade enclosure)
- Height: 3.5 inches (2U)
- Width: Standard 19" rackmount
- Depth: 29 inches
- Weight: 15lbs
- Size and weight (per module)
- Height: 1.75 inches (1U)
- Width: 8.5"
- Depth: 29 inches
- Weight: Base config 20lbs, varies based on configuration
- Operating System Software
- RedHat Linux 6 and newer (most other distributions supported, call for details)
- Windows 2008 and newer
|
Flex enclosure with 4x 1FX2601 single slot Flex nodes
Flex enclosure 1x 2FX2601 dual slot Flex node (left side) + 2x 1FX2601 single slot Flex nodes (right side)
Individual single slot Flex node with 2x 2.5" hotswap drives
Individual dual slot Flex node with 4x 2.5" hotswap drives and Intel Xeon Phi coprocessor
|
Products 
