Custom configurations
Many custom configurations are available, including drive configurations, expansion cards, etc.
If you don't see the configuration you're looking for, use your Custom System form so we can configure your perfect machine.
Warranty and support
All systems come with our standard 9x5 one year cross-ship return to depot warranty. Upgraded warranty options including multiple years, 24x7, and on-site service are available. Read more information about our warranties.
Lifetime technical support is included with every Advanced Clustering system. This includes support via, email, or our toll-free support telephone line.
|
|
Pinnacle 1BA6102 - 1U with two blade modules featuring the AMD Opteron 6200 series processor
Blade enclosure with two 1BA6102 compute blades installed
Starting at $1,895.00
|
Configure Your System
Use the form below to configure each 1/2 of the blade system. Each half can contain a completely separate configuration - if you'd like multiple configurations please submit this form multiple times - or give us a call at 866-802-8222 to discuss your needs.
Technical Specifications
- In the box
- Blade server housing
- 1 or 2 complete server blade modules
- Rackmounting hardware
- 110V power cord(s)
- Documentation
- Processor (per module)
- Two AMD Opteron 6200 Series processors
- Next generation "Interlagos" processor
- Dual Integrated memory controller per processor
- 32nm process technology
- Chipset (per module)
- Memory (per module)
- 1333MHz/1600MHz DDR3 memory
- Sixteen DIMM sockets for support up to 128GB of memory
- Storage (per module)
- One 3.5" SATA2 drive bay or two hotswap 2.5" SATA2 drive bays
- Support RAID level 0-1 with Linux software RAID (with 2.5" drives)
- Drives shock mounted into enclosure to prevent vibration related failures
- Support for high-performance solid state drives
- Management (per module)
- Integrated IPMI 2.0 module
|
- I/O connections (per module)
- One open PCI-Express expansion slot running at 16x
- Two independent 10/100/1000Base-T (Gigabit) RJ-45 Etherent interfaces
- Two USB 2.0 ports
- One DB-9 serial port (RS-232)
- One VGA port
- Optional ConnectX-2 QDR InfiniBand QSFP connector
- Electrical Requirements (per module)
- High-efficiency power supply (greater than 80%)
- Output Power: 500W
- Universal input voltage 100V to 240V
- Frequency: 50Hz to 60Hz, single phase
- Size and weight (blade enclosure)
- Height: 1.75 inches (1U)
- Width: Standard 19" rackmount
- Depth: 29 inches
- Weight: 10lbs
- Size and weight (per module)
- Height: 1.75 inches (1U)
- Width: 8.5"
- Depth: 29 inches
- Weight: Base config 20lbs, varies based on configuration
- Operating System Software
- RedHat Linux 6 and newer (most other distributions supported, call for details)
- Windows 2003 and newer
|
|
Products 
